3 Inch Lift Tires (Best, 35s, For Tacoma 3 Inch Lift)

Putting a lift on your vehicle comes with numerous advantages, like improving its general performance and speed limit. However, while lifts are generally ideal, they must be accompanied by the right tire sizes. This is due to safety and compatibility concerns.

So, what tire size is ideal for a three-inch lift? The ideal tire size for a three-Inch lift is 33×12.50. If you offload a 3-inch lift, it gives you sufficient clearance for 32×11.50 tires. However, the width might not be big enough for the lift, meaning you will need 33×12.50 tires. You must ensure that these tires are mounted on aftermarket wheels, creating enough additional spaces to make the lift effective.

If you want to put a lift on your vehicle, there are certain factors you need to understand. Getting the right tire size is very important if you plan to put a lift on your vehicle. Most drivers put lifts on their vehicles to improve performance and tackle off-road terrains. While this is helpful, it cannot materialize without the required tire sizes.

The ideal tire size to fit on a three-inch lift is 32×12.50. You must ensure that these tires are mounted on aftermarket wheels for the best results. This is also helpful because they will create additional space away from the suspension.

Remember that fitting 33-inch tires to any off-road vehicle helps improve their off-road abilities. It also helps provide better traction on and off-road and improve ground clearance. While putting lifts on vehicles comes with numerous benefits, it is not always a straightforward procedure — in some cases, the fitment can be very complicated and time-consuming. The chances of such things happening depends on the vehicle’s design.

However, fitting bigger tires is the most effective way of improving your vehicle’s ground clearance. This is ideal if you won’t go to overcome obstacles when driving off-road. While bigger tires are ideal, there are limitations, especially regarding IFS 4WDs.

IFS (Independent Front Suspension) limits your options since there are several suspension components and a few sensitive parts to consider. On the other hand, SFA (Solid Front Axle) vehicles are much easier to do.

If you want to modify an IFS truck and introduce a three-inch lift, additional modifications are required to make the 33-inch tire upgrade a success. This is required for the tire to turn at full lock without scrubbing and maintaining a steady full circulation when driving off-road.

You will find tricks with wider, bigger arches from the factory, while others have a much less clearance ability and narrow square arches. All these features can limit the truck’s ability to tackle off-road terrains. Some trucks sit higher off the ground, while others have significantly low ground clearance. All these factors play an important role in choosing the right tire size.

Therefore, if you go higher than a 2½ to 3-inch lift on an IFS truck, you will experience severe CV angles. This means you are at a greater risk of destroying a CV off-road. Thankfully, there is a way you can fix this.

You will need to fit a different drop kit to lessen the angle on the CV once you go beyond three inches. This also means you will have a very steep UCA angle, limiting your downward travel. Besides, it puts extra strain on the upper ball joints, forcing you to go for aftermarket products to fix the problem. You will also be forced to do the same for stabilizer links that are often caused by a similar adjusting problem.

When putting a lift on a 4WD truck, the front suspension plays a vital role in determining the complexity of the required upgrade. In the case of a LIVE or SFA axle, the axle must be separate or fixed to the chassis.

This is crucial because it allows you to install higher lifts and big tires more easily. When putting a lift on such vehicles, the CV angles remain constant since they are in line with the difference (which is always housed inside the axle). The difference allows you to fit a 3″, 4″, or 6″ lift on the truck. This is possible without having to deal with so many hassles.

Fitting a 33-inch tire to a Live/Solid axle truck requires fewer additional modifications, and, in most cases, little arch or body modifications. It would help if you didn’t spend a fortune trying to modify your vehicle’s body to fit the lift.

Unfortunately, most 4WD’s in production today are IFS suspensions. Manufacturers are more focused on on-road performance and safety, meaning they produce IFS trucks that appeal to a larger market. Besides, these vehicles spend a large part of their time on-road in most cases. This means they don’t have the ability to tackle tough off-road terrains.

Can 35s Fit on a 3 Inch Lift?

Tire sizes are crucial when it comes to putting lifts on vehicles. While lifts come with various advantages, getting the right tire size is vital. Most drivers wonder if you can fit a size 35 tire on a 3-inch lift.

You can fit size 35 tires on a 3-inch lift. However, keeping the tire sizes within the right range is necessary to avoid performance problems. The type of vehicle you are working with also helps determine the necessary tire size. You can fit a size 35 on a 3-inch lift with the right amount of work.

However, most require tedious work. For that reason, you need to get a tire that fits the vehicle, not just the lift. It would help if you got a high-quality tire that fits and functions easily with a three-inch lift.

There are several reasons why people put lifts on vehicles. They range from the need to change tires in case of a flat, creating space for underneath operations, or providing more road clearance. Besides, you might have to lift your vehicle to enable it to accommodate bigger tires. This also works if you want to provide more traction using specialized lifting kits.

It would help if you kept in mind several things before lifting your vehicle. First, you must ensure you have the right lift to support the weight of your vehicle. Secondly, ensure you have the knowledge to undertake the operation safely. If you are certain that you meet these two requirements, you can go ahead and lift your vehicle.

If you intend to lift your car, you shouldn’t park it at certain places such as a slope or corner. Instead, proceed to locate the jacking points under the vehicle for the lifting process. If you plan to go underneath the car for whatever reasons, ensure the axle or jack stands for protection in case the case slips and moves. When lifting the car only to gain more appeal or traction, you should be cautious about increasing gas mileage.

Remember that you need specific tires sizes for various lifts. For 32-inch tires, you will need a 3-inch lift running 5 to 6 inches. Every aspect of this operation depends on the tire width and backspacing. Generally, you will need around three to four inches for a 32-inch tire.

To install 35-inch tires, you require at least a 6-inch lift — however, this depends on your vehicle’s backspacing, the width of its tires, and the offset of its wheels. Sometimes, fender trimming might be needed before installing tires on new lifts.

There are several methods of lifting your vehicle with the intention of accommodating bigger wheels. This is also designed to improve traction with the road, such as through the use of Torsion Keys that tend to add around 1.5 inches to the lift. You can also use body lifts, leveling kits, and premium lift systems.

These lifting kits are much safer for use if you want to add more height to your vehicle. However, lifting kits should be installed by professionals for the best results. Another situation you might be forced to lift your vehicle is when you have a flat tire or have to go underneath for some reason.

Even though size 35 tires can fit on 3-inch lifts, they might not be ideal for off-roading. Therefore, if you intend to use your vehicle for off-roading, you should get bigger tires. Most drivers meet this requirement by modifying car tires and increasing their width.

If you don’t intend to go off-road, you can use size 35 tires. However, you still have to be cautious about the speed limit because large tires might not handle high speed. Overspeeding could see you lose control of the vehicle, increasing the risk of accidents.

What Size Tire Can Fit on a Tacoma 3 Inch Lift?

The Toyota Tacoma is an excellent truck, especially if you like an adventure. It comes with remarkable ground clearance and a powerful V6 engine. Some drivers wonder what is the ideal tire size for Tacoma 3-inch lift.

The right size for a Tacoma 3-inch lift is 35 inches. However, it should have additional modifications for the best results. Given that these tires are massive, friction might occur and affect performance. Therefore, whenever you install bigger aftermarket rubber, the chances are, you will run into friction between the car body and tire.

This is how the Toyota Tacoma works, giving you a difficult time putting a lift. Generally, you can only fit slightly bigger options rather than smaller ones. Remember that the Toyota Tacoma is designed to fit a specific tire size. Therefore, there are elements like cabin mounts that could get in contact with bigger rubber pieces you install. Cabin mounts are precisely what they are: creating space for cabin rests.

Given that some parts of the cabin stick out, you can opt to cut them to create a smooth outline. The best way to know where and how to cut the cabin is by letting a professional handle it.

This is a complicated process that involves cutting, power tools, grinding, and welding. Therefore, you should try doing it by yourself, especially if you don’t have the necessary skills. The task also involves cutting a piece of the support cabin and creating a cover to reinforce the cut part.

You should know that you risk exposing the cabin elements whenever you cut into its frame. This means the Toyota Tacoma’s base is susceptible to rust, especially in winter climates. To prevent this, you can spray protective paint over the welds and cuts.

If you don’t have the necessary skills and equipment to handle this task, let a professional handle it. Even if you go up by one inch while lifting your Toyota Tacoma, you will still intrude on its bumper.

Perhaps, that is why you see a lot of aftermarket bumper for Toyota Tacoma trucks. If you feel creative and don’t want to spend money buying a new bumper, you can cut it. Remember that cutting bumpers involves taking off the front and sides. This prevents the bumper from getting in contact with the tire after lifting. You will need prominent fenders if you want to keep tires in a firm position.

Prominent fenders are necessary because they protect the bumpers from getting in contact with tires. When the fenders are too big, some drivers cut them off. This helps create a bigger arch that creates room for the tire to operate.

For a high-quality overall finish and better looks, you can install flares to cover the newly cut area. Some drivers get creative and install colorful lights in the arch. This creates a spectacular view, especially in the dark. These features also help enhance driving, especially on tough terrain. With bigger tires, you can go off-road and take on any road surface.


Putting a lift on your vehicle is crucial for its performance. Lifts help the car improve its off-road performance and make traction better. For a three-inch lift, you will need a 33×12.50 tire. This tire size is ideal because it fills up the arch created by the lift. Avoid going for larger tires, especially if your vehicle is accustomed to small ones (30 to 33 inches).

On the other hand, you can fit size 35 tires on a 3-inch lift, but you will have to ensure the tire is compatible with your vehicle. The large size of these tires means they could rub and affect performance. The ideal tire size for a Tacoma 3-inch lift is 35 inches. While this can work smoothly, it will still need modifications to be perfect.

Recent Posts